--
Insane Wiring!
First things first, don't get wires confused! This
can equal very bad things. Power supplies can blow (dunno, sounds
true), fans can go bad, etc. So be careful, better yet the easiest
way is to label them with stickers. Less confusion will equal less
headaches later. So here is what the diagram of what will be done :
This type of wiring can be re-done in a couple of
different combinations, but this is just a simple example. To start
off, the SPDT switch will select either 12volts or 5volts that will
get carried directly to the fan. The simplest way I tried was having
the switch between the molex connector that is coming from the power
supply and the fan bus. From there, you can wire any of the
combination of fan spring clips outlets you choose. Remember, this
is all customizable!
-- Next: Pics, rants and
raves!
|
|
