-- PCMods.com Plexi Window Kit
-- By: Mile_High
is having their Grand Opening and I was fortunate enough to get to
review one of their products, the Window Kit. Itís a great little
package and a breeze to install. If you are in the market for
some plexi case mod action and you don't have the tools, this is
probably for you. The contents of the kit are as follows:
- Plexiglas window already cut to shape.
- 3 feet of rubber molding.
- 3 feet of rubber locking strip.
- Spacer (a washer)
- Instruction sheet.
Window Kit Contents
I was hoping I could install it
in a fancy blue case I got a few days ago, but with the plastic
attached to the metal side it was too thick for the groove in the
rubber gasket. No problem, I had another case in reserve to install
it in. The instructions were clear-cut and anybody can install this
mod if they have the recommended tools, which are:
- 2" masking tape.
- sabre saw, nibbler, or a dremel tool.
- round file or deburring tool
- flat file
- utility knife
Taking Measurments --