|-- A Closer Look -- Part II
Continuing down the line, so to speak, the next attached item is the mic. The mic attaches at the back of the first box, next to where the first box attaches to the inverter box.
Here is a close up of the mic. On the side of the mic, HF-15E is printed, even after a Google search, I'm still not sure about any of the specs. Here is a close up of the mic.
The next image is the CCFL attached to the inverter. ICEe Computers uses an 8inch cable from the inverter box to the CCFL, which is okay if the CCFL has 1 end near the base of the case, but it is a bit short for common installation choices.
The next shot is the close-up of the inverter end showing the hinged end and how the wire is attached to the lamp end. Also, you can see the clear acrylic tube used to protect the lamp.