|-- A Closer Look
-- Page: 1
are the specifications on the MPD from the back
of the box.
||Plastic + Matel Cover
||IDE to USB/IEEE1394
||Operating 5-60 C
Non-operating -25-80 C
Non-operating 15% - 90%
||Win98/2000/ME/XP/MAC OS (9.0+)
lets take a look inside of the MPD. Turning over
the drive closure there are 4 screw holes. I removed
all of them to look at what is
inside. My screw driver is holding it up in the
picture below. They
have included 4 rubber feet that cover the screw
holes, but they were not attached.
bottom removed shows the 40-Gig HD that was installed.
I had to slide the HDD out to see the battery
that was below the hard drive. There is a quick
guide on installing / removing the lithium-ion battery
that is included with the drivers.