|-- Taking a Closer Look
-- Page: 1 2
Here is the cable after I cut open the bag
and removed the wire wraps. The package includes 5 feet of light
strip, a 1" x 3/4" sealed silent inverter w/ double sided
tape square, and a 7" lead with a male molex connector.
What is truly unique about this kit is the way
the light strip is attached to the inverter. It uses a sealed and
crimped Molex disconnect which makes a very solid connection to the
light strip. In fact, you don't have to worry about pulling it apart
with this system. Here is an image of the EL Custom Shop method and
Splicing wires is never fun and if you're not handy
with a soldering iron and heatshrinkm it can be dangerous. EL Custom
Shop has addressed this issue by using 2 wire connectors that has a
positive lock and press to release feature as seen below.