The tape did a very good job on keeping the
heatsink on the chip. I let it sit about an hour to let all
the glue between the fan and heatsink to fully dry just to make
This homemade combo takes up 1 PCI slot and overlaps
another, so make sure you have some to spare.
And to fully test out the results of
this bigger heatsink, we clocked our Voodoo 3 a bit higher. We
accomplished a 9 MHz increase with no visual distortions what so
ever! Probably not the best cooler size wise, but this may
give you that extra couple of points or frames per second in your
favorite app if you have room to spare.
If you have any homemade mods like
this, shoot an email
over and let us know about it! Hope this helped out, good luck!