-- Page: 1
After doing all that drilling and cutting, make sure
you wipe clean all the aluminum particles that went into the box.
I usually take a dust vac and suck out all the particles first then
wipe it down with a damp towel. That does the trick most of
There we have it, our second part of
the guide is complete. We put in a blowhole and a Liquid Neon
Tube. This should definitely turn some heads at the local LAN
Our next step, Part 3, our last part
which should be good will include connecting all the wires together
and putting a bay bus into the mix. All in one control center
up front to keep this system cool and complete!
Discuss it in the Forums!