-- Page: 1
Our next step was to get some air flow into the this
box. Things heat up when your fragging away in a room with a
dozen or more computers. Simplest way we know, cut a blow
From our review of PCMods Fan Grills, we already
have detailed the way to attach some nice grills on our blow holes.
There is no extra fan fixture on the back of this case, so the best
we could do was create one on the top. There are already 2
80mm fans in the bottom front of the case, but we decided not to
mess with those. I think having a front intake on this case
makes it look like it has a gaping front mouth. Kind of
awkward in my opinion.
The steps we took for creating this monster, are as
follows. You will need the basic drill and dremel.
- Pencil in the hole and outline of the grill using the grill
- Masking tape the edges to prevent jerk movements
- Drill the corner holes
- Dremel cut the circle
- Should take no more than 10-15 minutes
Here is our finished product, simple
and sweet. Lets out the hot rising air and looks swank at the
Project Guide: Part 2