-- Applying
Window Etching to your Case
-- 3.30.2001
-- By: GideonX
There are numerous case mods out there with window
kits. Add a neon tube inside your case behind that window and
you have yourself a nice pimpin' case to show off to your friends.
But how do you make your case stand out from the rest? Add more
neon? If those tubes are costing you too much, I would suggest
slapping in some Window Etchings!
Thats what we're talking about! A
custom etching that is removable, so do not worry about your window
having that etching forever. You may purchase these custom
etchings through our supplier, PC
Mods. They've done a great job in converting our logo to
these etchings!
Here is our guide on how to apply this
etching within 5 minutes of receiving it. First off, when you
receive your package, it comes with the custom etching and an
applicator. It looks something like a hard plastic squeegee.
The next step would be to remove your
case window. Take a towel and wipe the window clean first of
any dust.
Figure out where you want to place the
etching on your window. Measure twice! But if you mess
up afterwards, it's ok, you can always re-apply.
When you have the correct spot
determined, flip the window over to the other side to prepare the
application.
Applying
the Etching >
< Back the Main
Page |
