Now that the package is open, let's take a close look at LightStrip kit. First up is the inverter. It is a black plastic box that is 2 3/8 x 1 x 5/8 inches (LxWxH) with Californeon on the top. There is one of those foam adhesive pads on the bottom to make installation very easy. The leads from the inverter to the LightStrip are 10 inches long and the leads from the molex to the inverter are 22 inches long, which allows for installation anywhere in your case with room to spare.
Lets take a look at the point of attachment between the strip and the wires from the inverter. The physical attachment is covered with heavy heat shrink and after some tugging it's pretty secure.
The brown paper that you see is the 3M adhesive backing that comes pre-installed. Here is a close up of the side of the tape that lights up. The lighted section of the tape is 5mm, whereas the total width is 1cm.