The four pieces that we capped with the L connectors and rubber feet will act as our legs of the box. Most PVC pipes are white, which are great because of the light reflection we will need.

The next step we'll need to do is connect the left and right bars. Grab the 4" and 8" tubes and connect them together with the T shapped connector.

Next, take the 24" piece and connect the two bars you just created.

Now attach this wide H shapped contraption you just made above and connect it to the four legs we made earlier.

This should leave you with something like this.

For my background, I took a 24" wide cut of my artist paper. It was rolled up on the bar that runs across the top.

I picked a few bulbs that were in a 3-pack, but the lumens and color were on the low side. With the clamp lamps ready, install your bulbs.

I picked up this really cheap white bed sheet. It will work perfectly in diffusing the color on our subject.